Discussion:
[Emc-users] Is there a way to automatic start EMC2.4.x with Axis in full screen mode on power up?
Don Stanley
2011-10-28 05:32:53 UTC
Permalink
Hi All;
As clever as EMC2 is I was wonder if it could start with Axis in full
Screen?
It is not a show stopper, just a convenience.

Thanks
Don
Andrew
2011-10-28 05:42:16 UTC
Permalink
Post by Don Stanley
Hi All;
As clever as EMC2 is I was wonder if it could start with Axis in full
Screen?
It is not a show stopper, just a convenience.
Don,
Look here
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?To_Make_The_AXIS_Screen_As_Large_As_Possible

Andrew
Slavko Kocjancic
2011-10-28 06:26:28 UTC
Permalink
Post by Andrew
Post by Don Stanley
Hi All;
As clever as EMC2 is I was wonder if it could start with Axis in full
Screen?
It is not a show stopper, just a convenience.
Don,
Look here
http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?To_Make_The_AXIS_Screen_As_Large_As_Possible
Andr
That's unusable as links in article is death.
As I remember that include some software installing...
And a lot of people asked that already. So why that (wishlist) isn't
done already.
For someone with knowledge of programming it's should be piece of cake
to 'push that maximize button' or even beter to let's AXIS to save last
used position (and probably edit window size too) and on next start
(autostart?) to show AXIS as is last used.

Near all program's can do that. AXIS not...

Slavko
John Thornton
2011-10-28 11:15:44 UTC
Permalink
There is a couple of ways shown here

http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/catid,21/id,320/lang,english/

John
Post by Don Stanley
Hi All;
As clever as EMC2 is I was wonder if it could start with Axis in full
Screen?
It is not a show stopper, just a convenience.
Thanks
Don
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
Viesturs Lācis
2011-10-28 12:30:16 UTC
Permalink
The second part of 5th point is awesome!
I have just one question - does Axis automatically search for .axisrc
file or does it need to be specified somewhere?

Viesturs
Post by John Thornton
There is a couple of ways shown here
http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/catid,21/id,320/lang,english/
John
Hi  All;
As clever as EMC2 is I was wonder if it could start with Axis in full
Screen?
It is not a show stopper, just a convenience.
     Thanks
         Don
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
John Thornton
2011-10-28 12:33:37 UTC
Permalink
you just put it in your home directory

John
Post by Viesturs Lācis
The second part of 5th point is awesome!
I have just one question - does Axis automatically search for .axisrc
file or does it need to be specified somewhere?
Viesturs
Post by John Thornton
There is a couple of ways shown here
http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/catid,21/id,320/lang,english/
John
Post by Don Stanley
Hi All;
As clever as EMC2 is I was wonder if it could start with Axis in full
Screen?
It is not a show stopper, just a convenience.
Thanks
Don
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
Pierre Deswysen
2011-10-28 17:57:33 UTC
Permalink
Hello John,

It does not work with the 2.5 ?

Pierre
Post by John Thornton
you just put it in your home directory
John
Post by Viesturs Lācis
The second part of 5th point is awesome!
I have just one question - does Axis automatically search for .axisrc
file or does it need to be specified somewhere?
Viesturs
Post by John Thornton
There is a couple of ways shown here
http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/catid,21/id,320/lang,english/
Post by Viesturs Lācis
Post by John Thornton
John
Post by Don Stanley
Hi All;
As clever as EMC2 is I was wonder if it could start with Axis in full
Screen?
It is not a show stopper, just a convenience.
Thanks
Don
------------------------------------------------------------------------------
Post by Viesturs Lācis
Post by John Thornton
Post by Don Stanley
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Post by Viesturs Lācis
Post by John Thornton
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Post by Viesturs Lācis
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Pierre Deswysen
Artisan-horloger


La Pendule d'Argent s.a.
Zoning Industriel de Chastrès
Allée des Linaires 2
B-5650 WALCOURT
Tél :+32/71/61.39.61
site : www.horlogedantan.com
Viesturs Lācis
2011-10-28 18:06:56 UTC
Permalink
Post by Pierre Deswysen
Hello John,
It does not work with the 2.5 ?
Is that a question or statement?

Viesturs
Pierre Deswysen
2011-10-28 19:13:02 UTC
Permalink
Yes it's a statement. I have got the 2.5
Post by Viesturs Lācis
Post by Pierre Deswysen
Hello John,
It does not work with the 2.5 ?
Is that a question or statement?
Viesturs
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Pierre Deswysen
Artisan-horloger


La Pendule d'Argent s.a.
Zoning Industriel de Chastrès
Allée des Linaires 2
B-5650 WALCOURT
Tél :+32/71/61.39.61
site : www.horlogedantan.com
Viesturs Lācis
2011-10-28 20:19:39 UTC
Permalink
And how about sharing at least some information?
Which version exactly - did You compile it or installed from buildbot package?
What exactly did You write in that .axisrc file?
How did You determine, that it was not working? Any error message or
something else?

Viesturs
Post by Pierre Deswysen
Yes it's a statement. I have got the 2.5
Post by Viesturs Lācis
Post by Pierre Deswysen
Hello John,
It does not work with the 2.5 ?
Is that a question or statement?
Viesturs
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Pierre Deswysen
Artisan-horloger
La Pendule d'Argent s.a.
Zoning Industriel de Chastrès
Allée des Linaires 2
B-5650 WALCOURT
Tél :+32/71/61.39.61
site : www.horlogedantan.com
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
John Thornton
2011-10-29 12:44:44 UTC
Permalink
Hello Pierre,

Yes it works with 2.5. I assume your talking about .axisrc file???

John
Post by Pierre Deswysen
Hello John,
It does not work with the 2.5 ?
Pierre
Post by John Thornton
you just put it in your home directory
John
Post by Viesturs Lācis
The second part of 5th point is awesome!
I have just one question - does Axis automatically search for .axisrc
file or does it need to be specified somewhere?
Viesturs
Post by John Thornton
There is a couple of ways shown here
http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/catid,21/id,320/lang,english/
Post by Viesturs Lācis
Post by John Thornton
John
Post by Don Stanley
Hi All;
As clever as EMC2 is I was wonder if it could start with Axis in full
Screen?
It is not a show stopper, just a convenience.
Thanks
Don
------------------------------------------------------------------------------
Post by Viesturs Lācis
Post by John Thornton
Post by Don Stanley
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Post by Viesturs Lācis
Post by John Thornton
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Post by Viesturs Lācis
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
Pierre Deswysen
2011-10-29 18:56:41 UTC
Permalink
Hello everybody,

My configuration:

- Ubuntu 10.04
- Emc2 version 2.5.0 pre2-72-g3c5d11f

I made a file .axisrc in /home

In this file I put: root_window.tk.call ("wm", "","."," geometry 1200x600")

Thank you for your help.

Pierre
Post by John Thornton
Hello Pierre,
Yes it works with 2.5. I assume your talking about .axisrc file???
John
Post by Pierre Deswysen
Hello John,
It does not work with the 2.5 ?
Pierre
Post by John Thornton
you just put it in your home directory
John
Post by Viesturs Lācis
The second part of 5th point is awesome!
I have just one question - does Axis automatically search for .axisrc
file or does it need to be specified somewhere?
Viesturs
Post by John Thornton
There is a couple of ways shown here
http://www.linuxcnc.org/component/option,com_kunena/Itemid,20/func,view/catid,21/id,320/lang,english/
Post by Pierre Deswysen
Post by John Thornton
Post by Viesturs Lācis
Post by John Thornton
John
Post by Don Stanley
Hi All;
As clever as EMC2 is I was wonder if it could start with Axis in full
Screen?
It is not a show stopper, just a convenience.
Thanks
Don
------------------------------------------------------------------------------
Post by Pierre Deswysen
Post by John Thornton
Post by Viesturs Lācis
Post by John Thornton
Post by Don Stanley
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more
rapidly.
Post by Pierre Deswysen
Post by John Thornton
Post by Viesturs Lācis
Post by John Thornton
Post by Don Stanley
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Post by Pierre Deswysen
Post by John Thornton
Post by Viesturs Lācis
Post by John Thornton
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Post by Pierre Deswysen
Post by John Thornton
Post by Viesturs Lācis
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Post by Pierre Deswysen
Post by John Thornton
The demand for IT networking professionals continues to grow, and the
demand for specialized networking skills is growing even more rapidly.
about Cisco certifications, training, and career opportunities.
http://p.sf.net/sfu/cisco-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Get your Android app more play: Bring it to the BlackBerry PlayBook
in minutes. BlackBerry App World™ now supports Android™ Apps
for the BlackBerry® PlayBook™. Discover just how easy and simple
it is! http://p.sf.net/sfu/android-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Pierre Deswysen
Artisan-horloger


La Pendule d'Argent s.a.
Zoning Industriel de Chastrès
Allée des Linaires 2
B-5650 WALCOURT
Tél :+32/71/61.39.61
site : www.horlogedantan.com
Viesturs Lācis
2011-10-29 19:39:35 UTC
Permalink
Post by Pierre Deswysen
Hello everybody,
- Ubuntu 10.04
- Emc2 version 2.5.0 pre2-72-g3c5d11f
I made a file .axisrc in /home
In this file I put: root_window.tk.call ("wm", "","."," geometry 1200x600")
I would put the file in /home/[your username] folder...

Viesturs
Pierre Deswysen
2011-10-29 19:58:43 UTC
Permalink
Ok, Thank you,
I had not understood that I was to place it IN home

Pierre
Post by Pierre Deswysen
Post by Pierre Deswysen
Hello everybody,
- Ubuntu 10.04
- Emc2 version 2.5.0 pre2-72-g3c5d11f
I made a file .axisrc in /home
In this file I put: root_window.tk.call ("wm", "","."," geometry
1200x600")
I would put the file in /home/[your username] folder...
Viesturs
------------------------------------------------------------------------------
Get your Android app more play: Bring it to the BlackBerry PlayBook
in minutes. BlackBerry App World™ now supports Android™ Apps
for the BlackBerry® PlayBook™. Discover just how easy and simple
it is! http://p.sf.net/sfu/android-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Pierre Deswysen
Artisan-horloger


La Pendule d'Argent s.a.
Zoning Industriel de Chastrès
Allée des Linaires 2
B-5650 WALCOURT
Tél :+32/71/61.39.61
site : www.horlogedantan.com
Viesturs Lācis
2011-10-29 20:02:49 UTC
Permalink
Does it work now?

Viesturs
Post by Pierre Deswysen
Ok, Thank you,
I had not understood that I was to place it IN home
Pierre
Post by Pierre Deswysen
Post by Pierre Deswysen
Hello everybody,
- Ubuntu 10.04
- Emc2 version 2.5.0 pre2-72-g3c5d11f
I made a file .axisrc in /home
In this file I put: root_window.tk.call ("wm", "","."," geometry
1200x600")
I would put the file in /home/[your username] folder...
Viesturs
------------------------------------------------------------------------------
Get your Android app more play: Bring it to the BlackBerry PlayBook
in minutes. BlackBerry App World™ now supports Android™ Apps
for the BlackBerry® PlayBook™. Discover just how easy and simple
it is! http://p.sf.net/sfu/android-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Pierre Deswysen
Artisan-horloger
La Pendule d'Argent s.a.
Zoning Industriel de Chastrès
Allée des Linaires 2
B-5650 WALCOURT
Tél :+32/71/61.39.61
site : www.horlogedantan.com
------------------------------------------------------------------------------
Get your Android app more play: Bring it to the BlackBerry PlayBook
in minutes. BlackBerry App World™ now supports Android™ Apps
for the BlackBerry® PlayBook™. Discover just how easy and simple
it is! http://p.sf.net/sfu/android-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
Pierre Deswysen
2011-10-29 20:12:29 UTC
Permalink
Yes, it is perfect.
Thank you

Pierre
Post by Viesturs Lācis
Does it work now?
Viesturs
Post by Pierre Deswysen
Ok, Thank you,
I had not understood that I was to place it IN home
Pierre
Post by Pierre Deswysen
Post by Pierre Deswysen
Hello everybody,
- Ubuntu 10.04
- Emc2 version 2.5.0 pre2-72-g3c5d11f
I made a file .axisrc in /home
In this file I put: root_window.tk.call ("wm", "","."," geometry
1200x600")
I would put the file in /home/[your username] folder...
Viesturs
------------------------------------------------------------------------------
Post by Pierre Deswysen
Post by Pierre Deswysen
Get your Android app more play: Bring it to the BlackBerry PlayBook
in minutes. BlackBerry App World™ now supports Android™ Apps
for the BlackBerry® PlayBook™. Discover just how easy and
simple
Post by Pierre Deswysen
Post by Pierre Deswysen
it is! http://p.sf.net/sfu/android-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Pierre Deswysen
Artisan-horloger
La Pendule d'Argent s.a.
Zoning Industriel de Chastrès
Allée des Linaires 2
B-5650 WALCOURT
Tél :+32/71/61.39.61
site : www.horlogedantan.com
------------------------------------------------------------------------------
Post by Pierre Deswysen
Get your Android app more play: Bring it to the BlackBerry PlayBook
in minutes. BlackBerry App World™ now supports Android™ Apps
for the BlackBerry® PlayBook™. Discover just how easy and simple
it is! http://p.sf.net/sfu/android-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Get your Android app more play: Bring it to the BlackBerry PlayBook
in minutes. BlackBerry App World™ now supports Android™ Apps
for the BlackBerry® PlayBook™. Discover just how easy and simple
it is! http://p.sf.net/sfu/android-dev2dev
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
--
Pierre Deswysen
Artisan-horloger


La Pendule d'Argent s.a.
Zoning Industriel de Chastrès
Allée des Linaires 2
B-5650 WALCOURT
Tél :+32/71/61.39.61
site : www.horlogedantan.com
Kirk Wallace
2011-10-30 16:04:04 UTC
Permalink
On Sat, 2011-10-29 at 20:56 +0200, Pierre Deswysen wrote:
... snip
Post by Pierre Deswysen
I made a file .axisrc in /home
In this file I put: root_window.tk.call ("wm", "","."," geometry 1200x600")
... snip

It may be handy to have this posted to the wiki if it isn't already
there. It may be hard to find, so adding appropriate keywords may help
Prof. Google. Just a thought.
--
Kirk Wallace
http://www.wallacecompany.com/machine_shop/
http://www.wallacecompany.com/E45/index.html
California, USA
Lawrence Glaister
2011-10-30 18:08:17 UTC
Permalink
interesting on 10.04lts, I had to use (as per wiki):

root_window.tk.call("wm","geometry",".","1280x1024")

in /home/lg/axisrc ....

#root_window.tk.call ("wm", "","."," geometry 1200x600") does not work

cheers
Lawrence
Post by Kirk Wallace
... snip
Post by Pierre Deswysen
I made a file .axisrc in /home
In this file I put: root_window.tk.call ("wm", "","."," geometry 1200x600")
... snip
It may be handy to have this posted to the wiki if it isn't already
there. It may be hard to find, so adding appropriate keywords may help
Prof. Google. Just a thought.
Loading...