John Freeborg
2017-06-20 14:30:02 UTC
Does anyone know why the "daily" digest feature never works correctly?
e.g. Its 9:30am CDT and I've gotten 4 emails from emc-users already (each with about 4-6 messages in them).
-----Original Message-----
From: emc-users-***@lists.sourceforge.net [mailto:emc-users-***@lists.sourceforge.net]
Sent: Monday, June 19, 2017 8:51 PM
To: emc-***@lists.sourceforge.net
Subject: Emc-users Digest, Vol 134, Issue 49
Send Emc-users mailing list submissions to
emc-***@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/emc-users
or, via email, send a message with subject or body 'help' to
emc-users-***@lists.sourceforge.net
You can reach the person managing the list at
emc-users-***@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific than "Re: Contents of Emc-users digest..."
Today's Topics:
1. EMC traffic (hubert)
2. Re: EMC traffic (Kurt Jacobson)
3. Re: EMC traffic (Bertho Stultiens)
4. Re: EMC traffic (David Berndt)
5. Things are quiet (jim)
6. Re: Things are quiet (Stuart Stevenson)
7. Re: Things are quiet (jim)
----------------------------------------------------------------------
Message: 1
Date: Mon, 19 Jun 2017 16:42:24 -0500
From: hubert <***@hbahr.org>
To: emc-***@lists.sourceforge.net
Subject: [Emc-users] EMC traffic
Message-ID: <805b6842-af3a-ca23-b366-***@hbahr.org>
Content-Type: text/plain; charset=windows-1252; format=flowed
Just checking, It seems unusual not to have any posts in this long a period. My last received post was 6/17/17, 12:27 PM
------------------------------
Message: 2
Date: Mon, 19 Jun 2017 17:51:35 -0400
From: Kurt Jacobson <***@gmail.com>
To: "Enhanced Machine Controller (EMC)"
<emc-***@lists.sourceforge.net>
Subject: Re: [Emc-users] EMC traffic
Message-ID:
<CABUMXJZ59Fryutq7gST7hPPUDhatqOxfrgA+=CkEqs=***@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
I was thinking the same thing. It's very unusual for this list to be so
quiet.
Kurt Jacobson
505-303-1933
Sent from Mobile
Message: 3
Date: Mon, 19 Jun 2017 23:52:06 +0200
From: Bertho Stultiens <***@vagrearg.org>
To: "Enhanced Machine Controller (EMC)"
<emc-***@lists.sourceforge.net>
Subject: Re: [Emc-users] EMC traffic
Message-ID: <0d044d0e-3235-c6a4-72c7-***@vagrearg.org>
Content-Type: text/plain; charset=windows-1252
--
Greetings Bertho
(disclaimers are disclaimed)
------------------------------
Message: 4
Date: Mon, 19 Jun 2017 17:57:29 -0400
From: "David Berndt" <***@uberwin.com>
To: emc-***@lists.sourceforge.net, hubert <***@hbahr.org>
Subject: Re: [Emc-users] EMC traffic
Message-ID: <***@random>
Content-Type: text/plain; charset=iso-8859-15; format=flowed;
delsp=yes
Everyone gave up and moved to machinekit...
Using Opera's mail client: http://www.opera.com/mail/
------------------------------
Message: 5
Date: Mon, 19 Jun 2017 20:24:26 -0400
From: jim <***@gmail.com>
To: "Enhanced Machine Controller (EMC)"
<emc-***@lists.sourceforge.net>
Subject: [Emc-users] Things are quiet
Message-ID: <e66cf93d-ba31-1e66-3d3a-***@gmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed
I need my machine to move On a 10 degree line using the x y axis .
I see g codes for this on other systems .
Can Linuxcnc do this?
Thank you,
Jim
------------------------------
Message: 6
Date: Mon, 19 Jun 2017 20:18:29 -0500
From: Stuart Stevenson <***@gmail.com>
To: "Enhanced Machine Controller (EMC)"
<emc-***@lists.sourceforge.net>
Subject: Re: [Emc-users] Things are quiet
Message-ID:
<CAHF93hSyuTDOgiMcgDqOk1urknCKE_14z5dfDh=***@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Yes, it will probably use the same g code you see for other systems
Which 10 degree angle do you want?
Message: 7
Date: Mon, 19 Jun 2017 21:51:12 -0400
From: jim <***@gmail.com>
To: "emc-***@lists.sourceforge.net >> Enhanced Machine Controller
(EMC)" <emc-***@lists.sourceforge.net>
Subject: Re: [Emc-users] Things are quiet
Message-ID: <fd0be5e6-6c15-1593-cac7-***@gmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed
I Want to sharpen a band saw mill blade which has a 10 degree tooth angle.
Will be using a 1/4" Dia. stone in the spindle and following the shape
of the blade.
Then indexing to the next tooth.
I will try g15 and g16 even though they are not on the reference list.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
------------------------------
Subject: Digest Footer
_______________________________________________
Emc-users mailing list
Emc-***@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------
End of Emc-users Digest, Vol 134, Issue 49
******************************************
e.g. Its 9:30am CDT and I've gotten 4 emails from emc-users already (each with about 4-6 messages in them).
-----Original Message-----
From: emc-users-***@lists.sourceforge.net [mailto:emc-users-***@lists.sourceforge.net]
Sent: Monday, June 19, 2017 8:51 PM
To: emc-***@lists.sourceforge.net
Subject: Emc-users Digest, Vol 134, Issue 49
Send Emc-users mailing list submissions to
emc-***@lists.sourceforge.net
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/emc-users
or, via email, send a message with subject or body 'help' to
emc-users-***@lists.sourceforge.net
You can reach the person managing the list at
emc-users-***@lists.sourceforge.net
When replying, please edit your Subject line so it is more specific than "Re: Contents of Emc-users digest..."
Today's Topics:
1. EMC traffic (hubert)
2. Re: EMC traffic (Kurt Jacobson)
3. Re: EMC traffic (Bertho Stultiens)
4. Re: EMC traffic (David Berndt)
5. Things are quiet (jim)
6. Re: Things are quiet (Stuart Stevenson)
7. Re: Things are quiet (jim)
----------------------------------------------------------------------
Message: 1
Date: Mon, 19 Jun 2017 16:42:24 -0500
From: hubert <***@hbahr.org>
To: emc-***@lists.sourceforge.net
Subject: [Emc-users] EMC traffic
Message-ID: <805b6842-af3a-ca23-b366-***@hbahr.org>
Content-Type: text/plain; charset=windows-1252; format=flowed
Just checking, It seems unusual not to have any posts in this long a period. My last received post was 6/17/17, 12:27 PM
------------------------------
Message: 2
Date: Mon, 19 Jun 2017 17:51:35 -0400
From: Kurt Jacobson <***@gmail.com>
To: "Enhanced Machine Controller (EMC)"
<emc-***@lists.sourceforge.net>
Subject: Re: [Emc-users] EMC traffic
Message-ID:
<CABUMXJZ59Fryutq7gST7hPPUDhatqOxfrgA+=CkEqs=***@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
I was thinking the same thing. It's very unusual for this list to be so
quiet.
Kurt Jacobson
505-303-1933
Sent from Mobile
Just checking, It seems unusual not to have any posts in this long a
period. My last received post was 6/17/17, 12:27 PM
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------period. My last received post was 6/17/17, 12:27 PM
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
Message: 3
Date: Mon, 19 Jun 2017 23:52:06 +0200
From: Bertho Stultiens <***@vagrearg.org>
To: "Enhanced Machine Controller (EMC)"
<emc-***@lists.sourceforge.net>
Subject: Re: [Emc-users] EMC traffic
Message-ID: <0d044d0e-3235-c6a4-72c7-***@vagrearg.org>
Content-Type: text/plain; charset=windows-1252
Just checking, It seems unusual not to have any posts in this long a
period. My last received post was 6/17/17, 12:27 PM
Seems right... No news is good news ;-)period. My last received post was 6/17/17, 12:27 PM
--
Greetings Bertho
(disclaimers are disclaimed)
------------------------------
Message: 4
Date: Mon, 19 Jun 2017 17:57:29 -0400
From: "David Berndt" <***@uberwin.com>
To: emc-***@lists.sourceforge.net, hubert <***@hbahr.org>
Subject: Re: [Emc-users] EMC traffic
Message-ID: <***@random>
Content-Type: text/plain; charset=iso-8859-15; format=flowed;
delsp=yes
Everyone gave up and moved to machinekit...
Just checking, It seems unusual not to have any posts in this long a
period. My last received post was 6/17/17, 12:27 PM
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
--period. My last received post was 6/17/17, 12:27 PM
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
Using Opera's mail client: http://www.opera.com/mail/
------------------------------
Message: 5
Date: Mon, 19 Jun 2017 20:24:26 -0400
From: jim <***@gmail.com>
To: "Enhanced Machine Controller (EMC)"
<emc-***@lists.sourceforge.net>
Subject: [Emc-users] Things are quiet
Message-ID: <e66cf93d-ba31-1e66-3d3a-***@gmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed
I need my machine to move On a 10 degree line using the x y axis .
I see g codes for this on other systems .
Can Linuxcnc do this?
Thank you,
Jim
------------------------------
Message: 6
Date: Mon, 19 Jun 2017 20:18:29 -0500
From: Stuart Stevenson <***@gmail.com>
To: "Enhanced Machine Controller (EMC)"
<emc-***@lists.sourceforge.net>
Subject: Re: [Emc-users] Things are quiet
Message-ID:
<CAHF93hSyuTDOgiMcgDqOk1urknCKE_14z5dfDh=***@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Yes, it will probably use the same g code you see for other systems
Which 10 degree angle do you want?
I need my machine to move On a 10 degree line using the x y axis .
I see g codes for this on other systems .
Can Linuxcnc do this?
Thank you,
Jim
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------I see g codes for this on other systems .
Can Linuxcnc do this?
Thank you,
Jim
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
Message: 7
Date: Mon, 19 Jun 2017 21:51:12 -0400
From: jim <***@gmail.com>
To: "emc-***@lists.sourceforge.net >> Enhanced Machine Controller
(EMC)" <emc-***@lists.sourceforge.net>
Subject: Re: [Emc-users] Things are quiet
Message-ID: <fd0be5e6-6c15-1593-cac7-***@gmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed
I Want to sharpen a band saw mill blade which has a 10 degree tooth angle.
Will be using a 1/4" Dia. stone in the spindle and following the shape
of the blade.
Then indexing to the next tooth.
I will try g15 and g16 even though they are not on the reference list.
Yes, it will probably use the same g code you see for other systems
Which 10 degree angle do you want?
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------Which 10 degree angle do you want?
I need my machine to move On a 10 degree line using the x y axis .
I see g codes for this on other systems .
Can Linuxcnc do this?
Thank you,
Jim
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------I see g codes for this on other systems .
Can Linuxcnc do this?
Thank you,
Jim
------------------------------------------------------------
------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Emc-users mailing list
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
------------------------------
Subject: Digest Footer
_______________________________________________
Emc-users mailing list
Emc-***@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
------------------------------
End of Emc-users Digest, Vol 134, Issue 49
******************************************